Monday 25 September 2017

Developing & Delivering KnowHow

Home > Knowhow > Vhdl Designers Guide > Vhdl 2008 > VHDL-2008 merges existing standards

VHDL-2008: Incorporates existing standards

VHDL-2008 includes standards that were in the past separate. These standards were only separate from the main VHDL standard because they were developed after VHDL itself. This led to some "quirks"; for instance the std_match function which does a "don't care" comparison between std_logic_vectors was defined in the numeric_std package - even though none of the other functions and operators in numeric_std work on type std_logic_vector!

Extra features have been added to the standard packages.

While some of these standards are packages, VHDL-2008 also incorporates PSL and the VHDL Programming Interface (VHPI). PSL is discussed here.

  • VHPI is included
  • Standard Packages are included
  • std_logic_1164 is extended
  • textio is extended
  • Context makes including packages is easier

    VHPI is included

    The VHDL Programming Interface 1076-2007c is a relatively new standard which defines a C interface to VHDL. The standard is complex and allows manipulation of the simulation process, static data, and dynamic data. From the point of view of VHDL-2008 all we need to know is that it is now included in VHDL!

    Standard packages are included in VHDL

    The original VHDL definition included only the types defined in the package std.standard. Over the years the following packages have been developed to work with VHDL:

    • IEEE.Numeric_Std
    • IEEE.Numeric_Bit
    • IEEE.Math_Real
    • IEEE.Math_Complex
    • IEEE.Std_logic_1164

    All these packages are now incorporated into the main VHDL standard.

    In addition a number of packages have become very widely used even though they are not official standards. These are:

    • std_logic_unsigned
    • std_logic_signed
    • std_logic_textio

    As mentioned previously The replacements for std_logic_unsigned and std_logic_signed are the new packages numeric_std_unsigned and numeric_std_signed.

    The functionality of the std_logic_textio is now included in IEEE.std_logic_1164. The user may still include std_logic_textio, but the package is now just a "stub" - the functions are actually provided in IEEE.std_logic_1164.

    std_logic_1164 is extended

    Not only is std_logic_1164 incorporated into VHDL-2008, it has been improved. The main changes are

    • std_logic_vector is now a subtype of std_ulogic_vectorwhich makes using both types together much easier
    • There are new operators and functions, including reduction operators, matching operators, minimum and maximum functions, shift operators, string conversion functions

    Here are some examples of the new operators:

      signal o : std_logic;
      signal x,y,v : std_logic_vector(2 downto 0);
    
      o <= i1 when ?? sel else i2; -- intepret sel as boolean
    
      o <= and v;   -- reduction operator, returns std_ulogic
    
      o <= x ?= y;  -- ?= and ?/= work on std_(u)logic_vector
                       -- ?= ?/= ?< ?<= ?> ?>= on std_(u)logic
    

    The matching operators return the appropriate operand type, rather than boolean.

    textio is extended

    Of course textio has been part of VHDL since the original standard in 1987, so perhaps does not really belong in this section. However it has been extended in a way that incorporates features sometimes provided by other non-standard packages (for instance the Mentor SDK). So this section summarises what is new.

    VHDL-2008 includes additional functions to read and write std_logic and std_logic_vector (historically people used the non-standard std_logic_textio to provide these functions).

    There is now a function swrite to simplify writing string literals. Here is an example:

      write(L, string'("-- start of file")); -- type qualification required
      swrite(L, "-- start of file");         -- no type qualification required
    

    If you wanted to write text to both a file and to standard output, it was not easy to do in VHDL 2002 and earlier - the simplest solution was simply to call the writeline procedure twice, once for each destination. VHDL-2008 adds a procedure tee to do this for you:

      tee(F, L);  -- writes to file F *and* to standard output
    

    If you want to explicitly flush a file without closing it, there is a procedure for that very purpose:

      flush(F);   -- flushes F to disk
    

    The procedures formerly in std_logic_textio for hex and octal format writing are included in textio. In addition, there are overloaded implementations of to_string for many different data types. There is also a function called justify to format data without using the justification and field width parameters of the standard read and write functions. Here is a slightly contrived example showing some of these features:

    write(L, justify(to_string(now,ns), field => 10) &
             justify(to_hstring(sel)  , field => 2 )   );
    

    Note the introduction of to_hstring as well.

    Context makes including packages easier

    Now all these packages are available, it can be a bit tedious adding all the appropriate package context clauses in front of your testbench or design. VHDL-2008 provides a way of grouping a set of library and use statements into a named context. Once the context is declared, it can be used repeatedly.

    For convenience there are some built-in contexts for common purposes such as writing synthesisable code.

    Here's an example which you might declare contexts for a site and a project:

    context site_context is  -- compiled into library sitelib
      library IEEE;
      use IEEE.std_logic_1164.all;
      use IEEE.numeric_std.all;
      use sitelib.sitepack.all;
    end context;
    
    context proj1_context is  -- compiled into library proj1lib
      library sitelib;
      context sitelib.site_context;
      use proj1lib.proj1pack.all;
    end context;
    

    Now anyone on the proj1 project can just say

    library proj1lib;
    context proj1lib.proj1_context;
    

    and they have a project standard setup in two lines!

    The VHDL-2008 standard defines two built-in contexts as follows:

    context IEEE_BIT_CONTEXT is
      library IEEE;
      use IEEE.numeric_bit.all;
    ene context IEEE_BIT_CONTEXT;
    
    context IEEE_STD_CONTEXT is
      library IEEE;
      use IEEE.std_logic_1164.all;
      use IEEE.Numeric_Std.all;
    end context IEEE_STD_CONTEXT;
    

    Previous Next

    Go back to the main VHDL-2008 page.

    Your e-mail comments are welcome - send email

Privacy Policy Site Map Contact Us