PLEASE NOTE: This is a LIVE INSTRUCTOR-LED training event delivered ONLINE.
It covers the same scope and content, and delivers similar learning outcomes, as a scheduled in-person class.
Learn how to implement a AMD PCI Express® core in custom applications to improve time to market with the PCIe® core design.
The focus is on:
This course also focuses on the AXI Streaming interconnect.
* This course focuses on the 7 series architecture. Please contact Doulos for the specifics of the in-class lab board or other customizations.
After completing this comprehensive training, you will know how to:
Lab 1: Constructing the PCIe Core – This lab familiarizes you with the necessary flow for generating a AMD Integrated PCI Express Endpoint core from the IP catalog. You will select appropriate parameters and create the PCIe core used throughout the labs.
Lab 2: Simulating the PCIe Core – This lab demonstrates the timing and behavior of a typical link negotiation using the Vivado simulator. You will observe and capture transaction layer packets.
Lab 3: Using the PCI Express Core in IP Integrator – This lab familiarizes you with all the necessary steps and recommended settings to use the PCIe solutions in an IP integrator block design.
Lab 4: Exploring the AMD DMA – This lab familiarizes you with all the necessary steps to set up and perform DMA transfers.
Lab 5: Implementing the PCIe Design – This lab familiarizes you with all the necessary steps and recommended settings to turn the HDL source to a bitstream by using the Tandem configuration mode.
Lab 6: Debugging the PCIe Design – This lab illustrates how to use the Vivado logic analyzer to monitor the behavior of the core and a small endpoint application for proper operation.
Complete an enquiry form and a Doulos representative will get back to you.
Enquiry FormPrice on request