* This course focuses on the 7 series architecture. Please contact Doulos for the specifics of the in-class lab board or other customizations.
Lab 1: Constructing the PCIe Core – This lab familiarizes you with the necessary flow for generating an AMD Integrated PCI Express Endpoint core from the IP catalog. You will select appropriate parameters and create the PCIe core used throughout the labs.
Lab 2: Simulating the PCIe Core – This lab demonstrates the timing and behavior of a typical link negotiation using the Vivado simulator. You will observe and capture transaction layer packets.
Lab 3: Using the PCI Express Core in IP Integrator – This lab familiarizes you with all the necessary steps and recommended settings to use the PCIe solutions in an IP integrator block design.
Lab 4: Exploring the AMD DMA – This lab familiarizes you with all the necessary steps to set up and perform DMA transfers.
Lab 5: Implementing the PCIe Design – This lab familiarizes you with all the necessary steps and recommended settings to turn the HDL source to a bitstream by using the Tandem configuration mode.
Lab 6: Debugging the PCIe Design – This lab illustrates how to use the Vivado logic analyzer to monitor the behavior of the core and a small endpoint application for proper operation.
Complete an enquiry form and a Doulos representative will get back to you.
Enquiry FormPrice on request